Weatherstation Modbus Register 1: Helligkeit Süd

Technical Definition

The register Helligkeit Süd at address 1 is used to monitor helligkeit süd on the Weatherstation.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: lx
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Helligkeit Süd (Address: 1)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=1, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Helligkeit Süd"
  address: 1
  value_type: U_WORD
  unit_of_measurement: "lx"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Weatherstation]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: South-facing light intensity, measured in Lux (lx). Quantifies the brightness of sunlight from the south.

Troubleshooting: Zero could mean nighttime, extreme cloud cover, or sensor malfunction/failure. Sudden changes might indicate obstructions or sensor damage.