T44 X04 Soil Modbus Register 2000: Device ID

Technical Definition

The register Device ID at address 2000 is used to monitor device id on the T44 X04 Soil.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit:
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Device ID (Address: 2000)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=2000, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Device ID"
  address: 2000
  value_type: U_WORD
  unit_of_measurement: ""

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[T44 X04 Soil]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Unique identifier for the Modbus device. Typically a decimal value.

Troubleshooting: Unreadable if device is offline, misconfigured, or has communication issues.