Srne Modbus Register 272: Name battery maximum discharging power current day

Technical Definition

The register name battery maximum discharging power current day at address 272 is used to monitor name battery maximum discharging power current day on the Srne.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: W
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name_battery_maximum_discharging_power_current_day (Address: 272)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=272, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name_battery_maximum_discharging_power_current_day"
  address: 272
  value_type: U_WORD
  unit_of_measurement: "W"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Srne]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Battery maximum discharging power (Watts) recorded today. Highest power drawn from the battery.

Troubleshooting: Low values suggest low load demand or battery output limitations.