Srne Modbus Register 267: Name battery minimum voltage current day

Technical Definition

The register name battery minimum voltage current day at address 267 is used to monitor name battery minimum voltage current day on the Srne.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: V
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name_battery_minimum_voltage_current_day (Address: 267)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=267, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name_battery_minimum_voltage_current_day"
  address: 267
  value_type: U_WORD
  unit_of_measurement: "V"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Srne]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Battery minimum voltage (Volts) recorded today. Lowest voltage the battery reached.

Troubleshooting: Unusually low values can indicate battery degradation, deep discharge, or connection issues.