Sr F000 F060 Sensor Modbus Register 61460: Name BatDisChgEnergyLast7day7

Technical Definition

The register name BatDisChgEnergyLast7day7 at address 61460 is used to monitor name batdischgenergylast7day7 on the Sr F000 F060 Sensor.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: Ah
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name BatDisChgEnergyLast7day7 (Address: 61460)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=61460, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name BatDisChgEnergyLast7day7"
  address: 61460
  value_type: U_WORD
  unit_of_measurement: "Ah"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Sr F000 F060 Sensor]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Battery discharge energy over the last 7 days (unit: Wh). Cumulative energy drawn from the battery.

Troubleshooting: Zero suggests no discharge or a data error. Examine battery operational status and Modbus register accuracy.