Single Pow Hvm62K 48V Lip Modbus Register 205: Inverter Voltagename suffix

Technical Definition

The register Inverter Voltagename suffix at address 205 is used to monitor inverter voltagename suffix on the Single Pow Hvm62K 48V Lip.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: V
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Inverter Voltagename_suffix (Address: 205)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=205, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Inverter Voltagename_suffix"
  address: 205
  value_type: S_WORD
  unit_of_measurement: "V"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Single Pow Hvm62K 48V Lip]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Output voltage of the inverter section in Volts (V).

Troubleshooting: 0 may indicate inverter shutdown due to overload, under-voltage, or internal fault. Check load and system status.