.Procon.Finder Modbus Register 4358: Finder2 Total Energy

Technical Definition

The register Finder2 Total Energy at address 4358 is used to monitor finder2 total energy on the .Procon.Finder.

• Protocol: Modbus RTU
• Data Type: FP32
• Unit: kWh
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Finder2 Total Energy (Address: 4358)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=4358, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Finder2 Total Energy"
  address: 4358
  value_type: FP32
  unit_of_measurement: "kWh"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[.Procon.Finder]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Records the total accumulated energy usage (kWh) for Finder 2. Key for energy management and cost tracking.

Troubleshooting: If zero, it indicates no energy consumption has been registered by the device.