My Inverter%206 2Kw Jk Bms%20V15 V19 Modbus Register 4551: Inverter name Battery Equalized Timeout

Technical Definition

The register inverter name Battery Equalized Timeout at address 4551 is used to monitor inverter name battery equalized timeout on the My Inverter%206 2Kw Jk Bms%20V15 V19.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit:
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read inverter_name Battery Equalized Timeout (Address: 4551)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=4551, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "inverter_name Battery Equalized Timeout"
  address: 4551
  value_type: U_WORD
  unit_of_measurement: ""

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[My Inverter%206 2Kw Jk Bms%20V15 V19]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Maximum allowed time in minutes or hours for equalization. Prevents overcharging in case of issues.

Troubleshooting: If 0, timeout may be disabled. Check if this value should be greater than 'Battery Equalized Time' for safety.