Jsy Mk 354 Modbus Register 330: Total Forward Reactive Energy

Technical Definition

The register Total Forward Reactive Energy at address 330 is used to monitor total forward reactive energy on the Jsy Mk 354.

• Protocol: Modbus RTU
• Data Type: U DWORD
• Unit: kWh
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Total Forward Reactive Energy (Address: 330)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=330, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Total Forward Reactive Energy"
  address: 330
  value_type: U_DWORD
  unit_of_measurement: "kWh"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Jsy Mk 354]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Total forward reactive energy (kVARh) consumed across all phases. Represents the total system reactive power demand.

Troubleshooting: Zero if all loads are purely resistive or no reactive power demand. Verify system configuration and load characteristics.