Itho Ventilation Modbus Register 3060: m3/h supply binnen totaal

Technical Definition

The register m3/h supply binnen totaal at address 3060 is used to monitor m3/h supply binnen totaal on the Itho Ventilation.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: m3/h
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read m3/h supply binnen totaal (Address: 3060)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=3060, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "m3/h supply binnen totaal"
  address: 3060
  value_type: U_WORD
  unit_of_measurement: "m3/h"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Itho Ventilation]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Total supply airflow in m³/h to the building from all sources. Overall ventilation performance.

Troubleshooting: Zero implies a complete system shutdown or major failure. Investigate fan power, control signals, and ductwork obstructions.