Heatpump Modbus Register 112: Refrigerant Liquid Side Temperature T2

Technical Definition

The register Refrigerant Liquid Side Temperature T2 at address 112 is used to monitor refrigerant liquid side Temperature t2 on the heatpump.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: °C
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Refrigerant Liquid Side Temperature T2 (Address: 112)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=112, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Refrigerant Liquid Side Temperature T2"
  address: 112
  value_type: S_WORD
  unit_of_measurement: "°C"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[heatpump]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Refrigerant liquid side Temperature (T2). Units: °C. Measures the Temperature of the liquid refrigerant.

Troubleshooting: Likely indicates a refrigeration cycle fault, sensor malfunction, or low refrigerant charge.