Geo9 Modbus Register 6173: Heatpump Prespipe T35

Technical Definition

The register Heatpump Prespipe T35 at address 6173 is used to monitor heatpump prespipe t35 on the Geo9.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: °C
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Heatpump Prespipe T35 (Address: 6173)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=6173, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Heatpump Prespipe T35"
  address: 6173
  value_type: S_WORD
  unit_of_measurement: "°C"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Geo9]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Pressure pipe Temperature (T35) within the heat pump system. Units: °C. High Temperature indicates compressor activity.

Troubleshooting: Sensor malfunction, abnormal compressor operation, or system overpressure. May relate to refrigerant charge or valve issues.