Flair400Modbusesphome Modbus Register 4032: Current value of supply air

Technical Definition

The register Current value of supply air at address 4032 is used to monitor current value of supply air on the Flair400Modbusesphome.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: m3/h
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Current value of supply air (Address: 4032)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=4032, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Current value of supply air"
  address: 4032
  value_type: S_WORD
  unit_of_measurement: "m3/h"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Flair400Modbusesphome]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Current volume or flow rate of the supply air. Units: Cubic meters per hour (m³/h) or CFM.

Troubleshooting: 0 suggests no air movement. Check fan operation, dampers, and filter status.