Esphome Web 4C96D0 Modbus Register 40107: Status

Technical Definition

The register Status at address 40107 is used to monitor status on the Esphome Web 4C96D0.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit:
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Status (Address: 40107)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=40107, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Status"
  address: 40107
  value_type: U_WORD
  unit_of_measurement: ""

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Esphome Web 4C96D0]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Provides operational status or error codes of the device. Specific values correspond to different states (e.g., running, fault, idle).

Troubleshooting: An error status requires consulting the device manual for specific code meanings. Check logs and related system parameters.