Esphome Web 4C96D0 Modbus Register 40073: AC Phase B Current

Technical Definition

The register AC Phase B Current at address 40073 is used to monitor ac phase b current on the Esphome Web 4C96D0.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: A
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read AC Phase B Current (Address: 40073)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=40073, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "AC Phase B Current"
  address: 40073
  value_type: U_WORD
  unit_of_measurement: "A"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Esphome Web 4C96D0]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Measured AC current for Phase B in Amperes (A).

Troubleshooting: Zero indicates no load on Phase B, wiring fault, or a malfunctioning sensor.