Esphome Web 10C200 Modbus Register 3082: 43082 Exhaust Temperature to outside

Technical Definition

The register 43082 Exhaust Temperature to outside at address 3082 is used to monitor 43082 exhaust Temperature to outside on the Esphome Web 10C200.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: °C
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read 43082 Exhaust temperature to outside (Address: 3082)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=3082, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "43082 Exhaust temperature to outside"
  address: 3082
  value_type: S_WORD
  unit_of_measurement: "°C"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Esphome Web 10C200]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Measures the exhaust air Temperature being expelled outside. Units are typically °C or °F.

Troubleshooting: Sensor failure, incorrect reading due to external factors, or HVAC system issue.