Esp32 C3 Mini Felicity Bms Modbus Register 4906: BMS1 Cell Information

Technical Definition

The register BMS1 Cell Information at address 4906 is used to monitor bms1 cell information on the Esp32 C3 Mini Felicity Bms.

• Protocol: Modbus RTU
• Data Type: INT16
• Unit:
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read BMS1 Cell Information (Address: 4906)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=4906, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "BMS1 Cell Information"
  address: 4906
  value_type: INT16
  unit_of_measurement: ""

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Esp32 C3 Mini  Felicity Bms]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Detailed cell voltage and Temperature data for BMS1. Multiple registers usually required for full data.

Troubleshooting: Errors/zeros could mean cell imbalance, communication loss, or sensor failure. Check individual cell connections and readings.