Deye Inverter Entities Sensor Modbus Register 182: Name inverter name battery Temperature

Technical Definition

The register name inverter name battery Temperature at address 182 is used to monitor name inverter name battery Temperature on the Deye Inverter Entities Sensor.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: °C
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name inverter_name battery temperature (Address: 182)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=182, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name inverter_name battery temperature"
  address: 182
  value_type: U_WORD
  unit_of_measurement: "°C"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Deye Inverter Entities Sensor]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Temperature of the battery pack. Units: Degrees Celsius (°C).

Troubleshooting: Invalid or out-of-range value indicates sensor failure. Check sensor connection and Temperature readings.