Deye Inverter Entities Advanced Modbus Register 263: Name inverter name battery voltage timezone2

Technical Definition

The register name inverter name battery voltage timezone2 at address 263 is used to monitor name inverter name battery voltage timezone2 on the Deye Inverter Entities Advanced.

• Protocol: Modbus RTU
• Data Type: INT16
• Unit: V
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name inverter_name battery voltage timezone2 (Address: 263)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=263, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name inverter_name battery voltage timezone2"
  address: 263
  value_type: INT16
  unit_of_measurement: "V"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Deye Inverter Entities Advanced]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Represents the battery voltage setting for the second time zone. Units: Volts (V).

Troubleshooting: Zero indicates no configuration or a communication error. Verify settings for this time period.