Device Sofar Modbus Register 526: Name inverter name battery voltage

Technical Definition

The register name inverter name battery voltage at address 526 is used to monitor name inverter name battery voltage on the Device Sofar.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: V
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name_inverter_name_battery_voltage (Address: 526)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=526, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name_inverter_name_battery_voltage"
  address: 526
  value_type: S_WORD
  unit_of_measurement: "V"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Device Sofar]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Voltage (Volts) of the connected battery bank. Crucial for monitoring charge state and system health.

Troubleshooting: Zero or out-of-range voltage suggests a battery fault, loose connection, or issues with the battery management system (BMS).