Device Modbus Register 9240: Current CH5

Technical Definition

The register Current CH5 at address 9240 is used to monitor current ch5 on the Device.

• Protocol: Modbus RTU
• Data Type: U DWORD
• Unit: A
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Current CH5 (Address: 9240)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=9240, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Current CH5"
  address: 9240
  value_type: U_DWORD
  unit_of_measurement: "A"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Device]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Measures electrical current flowing through Channel 5. Units: Amperes (A). Shows the magnitude of current draw.

Troubleshooting: Zero means no current is flowing. Check for open circuits, device failure, or absence of load on Channel 5.