Device Jkpb0116 Modbus Register 4746: Name bms name mosfet Temperature

Technical Definition

The register name bms name mosfet Temperature at address 4746 is used to monitor name bms name mosfet Temperature on the Device Jkpb0116.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: °C
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name_bms_name_mosfet_temperature (Address: 4746)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=4746, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name_bms_name_mosfet_temperature"
  address: 4746
  value_type: S_WORD
  unit_of_measurement: "°C"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Device Jkpb0116]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: MOSFET Temperature (°C). Monitors the Temperature of the power switching transistors within the BMS. Crucial for preventing thermal runaway and component damage.

Troubleshooting: High values indicate potential overload or cooling issues. Zero might signal sensor malfunction or the device being offline.