Device Deye Advanced Modbus Register 273: Name inverter name setting soc timezone6

Technical Definition

The register name inverter name setting soc timezone6 at address 273 is used to monitor name inverter name setting soc timezone6 on the Device Deye Advanced.

• Protocol: Modbus RTU
• Data Type: U WORD
• Unit: %
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read name_inverter_name_setting_soc_timezone6 (Address: 273)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=273, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "name_inverter_name_setting_soc_timezone6"
  address: 273
  value_type: U_WORD
  unit_of_measurement: "%"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Device Deye Advanced]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Deye inverter setting for State of Charge (SoC) related to Timezone 6. Units are typically percentage.

Troubleshooting: Zero value could signify misconfiguration, disabled feature, or communication error with the inverter's internal clock/scheduling.