Brinkwtw Modbus Register 4047: Buiten uitblaas luchtvochtigheid

Technical Definition

The register Buiten uitblaas luchtvochtigheid at address 4047 is used to monitor buiten uitblaas luchtvochtigheid on the Brinkwtw.

• Protocol: Modbus RTU
• Data Type: S WORD
• Unit: %
• Access: Read Only

How to Read (Python pymodbus)

Use this code snippet to read this specific value via RS485:

from pymodbus.client.sync import ModbusSerialClient

client = ModbusSerialClient(method='rtu', port='/dev/ttyUSB0', baudrate=9600)
client.connect()

# Read Buiten uitblaas luchtvochtigheid (Address: 4047)
# Note: Check if your device uses 0-based or 1-based addressing
result = client.read_input_registers(address=4047, count=2, unit=1)

if not result.isError():
    print(f"Raw Value: {result.registers}")
else:
    print("Error reading register")

client.close()

Integration (Home Assistant)

Paste this into your configuration.yaml:

- platform: modbus_controller
  name: "Buiten uitblaas luchtvochtigheid"
  address: 4047
  value_type: S_WORD
  unit_of_measurement: "%"

Connection Diagram

Here is the standard RS485 wiring for this configuration:

graph TD
    PLC[Host Controller / Home Assistant]
    Device[Brinkwtw]

    PLC -- "A+ (D+)" --> Device
    PLC -- "B- (D-)" --> Device
    PLC -- GND --> Device

💡 Engineer's Insight

Analysis: Outdoor supply air relative humidity (%). Measures the humidity of the air supplied to the building. Affects indoor air quality and comfort.

Troubleshooting: Zero or inaccurate readings could be a sensor malfunction or damage. Inspect the sensor and its protective housing for any issues.